Increasing the life of your headphones
- 21 Nov, 2018
As mobile devices and technology continue to increase, headsets and headphones have become critical electronic devices. When shopping, it is wise to look for durable headphones that can give you service for a long time. After buying such headphones, you will have to take care to make the headphone last longer.
Common problems of headphones
Some of the difficulties encountered when using a headphone that might reduce the life of the headphone include the following:
An audio sound coming out in One Ear Only
The cause of receive audio through just one ear may be that headphone jack is placed halfway. Fortunately, it is easy to fix. Simply, fully plug the headset’s cord into the audio device. If the problem persists, test an alternate headset to ascertain if the headset is faulty or it is the audio device that has the problem.
A Headphone Jack with Moisture
Depending on the content level, Moisture can cause many problems in the audio jack. As a result, the damage varies from minor glitches to practically making the audio jack useless. The solution for this is to use a hair dryer to dry out moisture in the headphone jack.
Not hearing audio sound
Inserting the headset in an incorrect port, if a computer has multiple ports can cause an audio problem. So, make sure to insert the headphone into the right audio input and output ports.
If the headset is not receiving power, it might also cause this fault. Therefore, check whether the headsets are fitted with fully-charged batteries or rechargeable units are linked to a power source.
No connection to a Tablet or smartphone Device
Wrong configuration setting can make your Bluetooth or wireless-enabled headset not to pair to your device. In that case, try to switch through different settings if the headset has a switch or setting dial. Find the settings that comfortably pair with your tablet or smartphone.
An Echo emerging from Either Side
Sometimes you might hear an echo during a headset conversation. Firstly, adjust the phone volume to halfway. If it does not iron out the issue, check your headset’s volume using the wheel on the headset. You can also try adjusting the speaker volume on the computer or other devices. In the end, you should be able to solve the problem with the three-volume setups.
Weak Wireless Connection
If you experience a weak audio reception through your wireless-connected headset, it might be that there is a placement issue with the wireless receiver. Just place the receiver closer to your device, approximately with 30ft, to increase the chance of getting a strong connection. Sometimes a metallic surface can cause interference so place the receiver on a non-metallic surface.
Hearing music playing with breaks
Using third-party headphones is one of the reasons this can occur. Most third-party headphones fail to firmly grip on to the audio device like other headphones jacks. Although this problem might seem to lessen when you gently shake the headphone’s wire, the long-term solution is to avoid using third-party headphones.
Why your headphones keep breaking
Nearly all headphones that are currently on the market break. Hardly can you last for a few years with headphones before it snaps. The simple reason is that these headsets have intricate internal components that are delicate enough to break easily.
So, know that whether you own one of the beauties that cost more than $300 or a junk piece costing from $15, it has components that quickly wears down and gets jostled. Broken headphones are not useful as you cannot hear any sound coming out of the audio device.
Some of the reasons that will make your headphones break so easily are as follows:
1.Rolling over the headphone Cord
Headphones have pretty long Cord lengths ranging between 7-10 feet. Instead of the coil it, many people are usually allured to let these cords hang up to the ground. This makes it easy for it to be stepped on or rolled over by a chair rendering it useless.
2.Dangling the Cord
While in use or when resting long-cord headphones that are left to dangle at the desks edge easily damage. The cord is usually bent at a 90-degrees causing due stress. Therefore, a little pinch or press might make the internal wire to break severely.
3.Winding the Cord into Knots
Most life hacks probably like to describe “ingenious” ways to avoid tangling through winding up earbuds. Internal wires will usually wear out at a faster rate when there are tight knots and loops. Avoid tight loops! To safely use headphones, you will have to wind up in “roadie wrap” way where the cord forms a figure eight to secure it with a twist tie.
4.Pulling the headphone Cord instead of the Plug
As earlier discussed, tension usually damages internal wires. However, putting extra stress is placed on where the cord meets the plug. As you continue to pull, the internal wire will separate from the plug. Unequal stresses are what causes the internal wires to break. So, never pull the cord!
5.Sleeping with headphones
It is not easy to control the way you sleep. You tend to twist and turn, flop about and roll around. The chances are high that you’ll snag the cords and even damage the cans due to the heavy weight of your head as you sleep.
To avoid such a scenario, listen to music and other sounds on speakers instead of headphones. If you have to sleep with headphones, then it would be safe to consider using wireless earbuds.
6.Turning up the Volume
For devices to produce noise, they create sound waves. It is usually the vibrations that produce sound waves so that a higher vibration will generate louder sounds. Excessive volume usually warps the sound-producing parts of the headphones as they are delicate. Certain frequencies will be heard at first as the audio quality continues to degrade. After some time, you will tend to hear buzzing and irritating sounds.
How to increase the durability of your headphones
Wear and tear causes headphones to produce quieter sound, frequently cut out or stop working entirely over time. Such problems will in most cases damaged the cable’s wiring and connections. Durable headphones can be able to give you service for several years.
Most people desire to have tips that enable the headphones to last for a longer time.
1. Wrapping the cable safely
If you choose to wrap your headphones around the music player, you might put strains and break the wiring. Instead, you should gently loop it about 6 inches around your hand. Then, wrap the remaining cord gently at the center part of the looped cable. When making a regular knot, do not pull tightly as you tie the loop together.
2. Protecting the weak points
They are usually potential with points at every connection a headphone wiring. Such points are not limited to the earpiece and plug but may occur on the volume sliders, and in-line splitter.
It is advisable not yank wire out but to directly pull the plug when disconnecting your headphones. Avoid pulling the cable around splitters and in-line devices especially when it has dangled off the table edge.
3. Cleaning Headphones
Sound usually become quiet or goes out when earwax and dust enter the headphones. In case you are using in-ear headphones, pull off its covers and remove any debris. You can later wash its earpiece with isopropyl alcohol, or water and mild dish detergent.
If the headphones covers have a mesh screen, soften the wax that has accumulated on the screen with weaker hydrogen peroxide.
4. Safely storing
Ensure you store your headphones in a clean and dry place. If there are cases available, you can use them. You should also avoid placing them near temperature extremes. The safest way to store the headphones is to use the official instructions that are provided to avoid unnecessary wear and tear.
Consider the benefits of wireless headphones
It is more convenient to wear a wireless headset compared to a wired one. Since it has no cables, it is beneficial in a way that you don’t need unwinding any cable to hear a song. A cable is usually bothersome when moving it.
One has to move around sound devices when using cables which limits the distance. The radius of action minimal as most cables are around 1-1.5 meters. However, with the wireless, the motion range is usually higher up to 8-9 meters.
Possesses more controls
Wireless headphones are not like any other headphones. They usually incorporate additional functions such as touch panels, volume control, hands-free buttons and more functions that enhance control of the device.
Nearly all the wireless headphones in the market are uniquely designed. Those headphones’ design surpasses the cable ones as you can also find cables for athletes.
It is easy to change a device without changing any cable. If you want to connect to another device, you will not have removes the headsets; But, link the new device.
Some recommended headphones and earbuds
Arkartech BN90 In-ear Bluetooth Earphones
HiFi Stereo Sound: The earphone enables you to experience lag-free auditory experience as it delivers crisp high-fidelity stereo sound quality.
Waterproof Neckband Design: Owing to it being rated IPX Level 5, these earbuds can withstand dripping sweat. Its Neckband design is applicable for biking, jogging, gym and running.
More Stable Transmission: You can enjoy high-fidelity sound without latency as it has a stable Bluetooth connection. It transmits Bluetooth signal more fast and reliable.
Comfortable to Wear: readily fits the ear canals due to its flexible ear hooks that are ergonomically designed.
Arkartech TWS 5.0 Pro True Wireless Sports Earbuds
Waterproof & Ergonomic Design: It’s ergonomic and waterproof design prevents rain, water, sweat, from entering into the earbuds.
True Wireless Stereo; it produces crystal clear treble incredible sound quality owing to its state of the art components. It uses the latest Bluetooth 5 technology thereby delivering right high-fidelity music.
Smart Compatible Button Design: You use its multi-function button, including replay, power on / off, play/pause, Call/reject, to operate it.
ArkarTech BT260 Bluetooth CSR8645 IPX4 Waterproof Magnetic Connection Wireless Sports Headphones
Outstanding wireless sound: features high-quality dynamic speaker system that gives a powerful bass sound when gaming or video viewing.
Lightweight: it has a durable carry case in which you can store headphones and easily carry around.
Fits in ears: These headphones come with different ear caps sizes that easily conform to diverse ear shapes.
ArkarTech BT800 Bluetooth PU+PEEK CSR8640 IPX5
Fashionable & Lightweight Design: its Side magnetic earbuds allow you to jog, bike, or run while the headphone is around the neck.
Super Sound Quality: It features CSR8640 Bluetooth chip that produces crisp high and deep bass high-fidelity stereo sound quality.
Noise Canceling: it has a noise reduction technology, CVC 6.0, that makes it clear to call and listen.
To wrap it up
If you bought one of those durable headphones from the market, you now know what you need to do to keep your headphone last longer. You are now aware of what causes the headphones to break after using them easily. It is up to you to take the above basic steps to increase the durability of your headphones to enjoy the benefits that wireless headphones offer.